IDEATEC POLARIS - Product Description; Main Features

IDEATEC S.A. - Z.I. de Noville-les-Bois - rue Léopold Génicot 19A - 5380 Fernelmont, Belgium - Tel: +32(0)81 42 00 10 - Fax: +32(0)81 57 91 70 - E-mail: info@ideatec.be
User Guide POLARIS V1.0 - Console V1.16 - Module V2.16
Page 4
Fonction
Test
3.
3.1 Main Features
Only one central unit to drive all the equipments and simple wiring.
Simplified mounting : only one bus cable between the power module and the console/interface.
Possibility to add extra power modules with EPM-103 .
Product description
The POLARIS device is made to control all electrical equipment added in a vehicle. Its installation is fully independent
from the original circuit. The system is fully configurable via the software SpeedFitter and provides a lot of advantages,
automation and special functions :
Each positive output can deliver up to 15Amps. Depending on your Central Unit size, some positive
outputs (18-19-20-38-39-40) can deliver up to 20Amps/output thanks to their dual connection.
The console (foot mounting) is delivered with its own multi-directional foot mounting to give the best
viewing angle for the user.
The backlighting enhances the visibility of the key. Thanks to the light sensor on each console, the
backlightning birghtness varies according to the outdoor light intensity : maximum brightness in a
sunny environment and less brightness in the dark to avoid blinding the user.
Positive static power output full protected against overload and short-circuit. The current for each
output must also be limited separately by software.
A lot of interlock functions are available like the blue lights/siren interlock, grill lights/blue light interlock,
keys conditions, etc.
Automatic standby available with configurable conditions and timing to protect the battery.
Special function for arrowstick driving from 4, 5, 6, 7 or 8 points with several options (including
arrows).
Visual and acoustic alarms for immediate pre-diagnosis : overload, openload, bus communication, etc.
The POLARIS is fully configurable with the user-friendly SpeedFitter software.
Flashing box function included : 30, 60 or 100 cycles/min.
The Walk Test function allows the driver to check all the outputs of the POLARIS step by step to be
sure tat all the equipments connected to the POLARIS are working well.