IDEATEC POLARIS - RJ45 Bus Cable; Connectors Te;Molex & Crimp Contacts

IDEATEC S.A. - Z.I. de Noville-les-Bois - rue Léopold Génicot 19A - 5380 Fernelmont, Belgium - Tel: +32(0)81 42 00 10 - Fax: +32(0)81 57 91 70 - E-mail: info@ideatec.be
User Guide POLARIS V1.0 - Console V1.16 - Module V2.16
Page 14
L
4.
11 (S)
21 (M)
32 (L)
42 (XL)
1 (S)
1 (M)
2 (L)
2 (XL)
36 (S)
36 (M)
72 (L)
72 (XL)
1 (S)
1 (M)
2 (L)
2 (XL)
1 (S)
1 (M)
2 (L)
2 (XL)
1 (S)
1 (M)
2 (L)
2 (XL)
1-968857-1
8-968975-2
649 005 137 22
649 006 113 322
649 014 113 322
649 016 113 322
4.10 2x RJ45 Bus Cable
In order to ensure perfect operation, only BUS cables assembled and supplied by the manufacturer
are accepted. Otherwise, unless authorised in writing, the manufacturer will not accept any
warranty or liability on the equipment installed.
Elements identification (continued)
The TE and Würth connectors are necessary to connect inputs/outputs of the POLARIS.
Their contacts must be crimped with a suitable tool (see references below).
4.11 Connectors & Crimp contacts
Standard or special option order :
Length = 1 meter - P/N : P0020F0042
Length = 5 meters - P/N : P0020F0027/FTP
Length = 6 meters - P/N : P0020F0043
Length = 8 meters - P/N : P0020F0028
Length = 10 meters - P/N : P0020F0029
Length = 15 meters - P/N : P0020F0044
Right Connector
Length = 5 meters - P/N : P0020F0097
Length = 8 meters - P/N : P0020F0098
Tool References
Pin Extractor
1579007-1
Qty
TE Connector Crimp Terminal
AWG 14-16
Crimp Tool
1976143-1
With Die Assembly
539727-2
Description
TE/Wurtz Reference
TE Connector 21P.
Würth Connector Crimp Terminal
AWG 16
Würth Connector 6P.
Würth Connector 14P.
Würth Connector 16P.
Crimp Tool
600 001
With Die Assembly
600 420 420 001
Pin Extractor
600 649