IDEATEC POLARIS - Openlink Interface

IDEATEC S.A. - Z.I. de Noville-les-Bois - rue Léopold Génicot 19A - 5380 Fernelmont, Belgium - Tel: +32(0)81 42 00 10 - Fax: +32(0)81 57 91 70 - E-mail: info@ideatec.be
User Guide POLARIS V1.0 - Console V1.16 - Module V2.16
Page 44
1
2
3
4
1
2
8.
RS232 SERIAL DATA
LINK TO COMPUTER
1 - Not used
2 - ON/OFF (same as<+>
ON/OFF key of touchscreen
console)
3 - Not used
4 - Not used
USB SERIAL DATA
LINK TO COMPUTER
OR
POLARIS DATA BUS
USB CONNECTION FOR CONFIGURATION SENDING
1 - <-> GND
2 - MAIN POSITIVE <+>
(MUST BE PROTECTED
BY FUSE MAX. 1A)
8.13 OpenLink Interface
Connecting (continued)
OpenLink Module takes the place of one console and is connected to the POLARIS data bus like the touchscreen
console.