IDEATEC POLARIS - Central Unit L & XL

To Next Page

To Previous Page

IDEATEC S.A. - Z.I. de Noville-les-Bois - rue Léopold Génicot 19A - 5380 Fernelmont, Belgium - Tel: +32(0)81 42 00 10 - Fax: +32(0)81 57 91 70 - E-mail: info@ideatec.be

User Guide POLARIS V1.0 - Console V1.16 - Module V2.16

Page 40

S8 - 1

S8 - 2

S8 - 3

S8 - 4

S8 - 5

S8 - 6

S10 - 1

S10 - 4

S10 - 2

S10 - 5

S10 - 3

S10 - 6

S8 - 7

S8 - 8

S8 - 9

S8 - 10

S8 - 11

S8 - 12

S8 - 13

S8 - 14

S8 - 15

S8 - 16

The POLARIS Central Unit provides up to 28 isolated positive or negative inputs (configured by software, except

positive input 1 for + ignition), 2x analog inputs (battery monitoring for example) and 2x CAN connection (to connect to

the vehicle Canbus and equipment controlled by Canbus for example).

FOR LARGE - XLARGE

.....................................................................................................

Ground connected to <-> battery

FOR XLARGE

.....................................................................................................

8.10 Central Unit L & XL - Inputs

Pos/Neg input nr.15

Pos/Neg input nr.16

Pos/Neg input nr.17

Pos/Neg input nr.18

Pos/Neg input nr.19

Pos/Neg input nr.20

Ground

Not used

Pos/Neg input nr.21

Pos/Neg input nr.22

Pos/Neg input nr.23

Pos/Neg input nr.24

Pos/Neg input nr.25

Pos/Neg input nr.26

Pos/Neg input nr.27

Pos/Neg input nr.28

Not used

DESCRIPTION OF THE FUNCTION

POS.

DESCRIPTION

Connecting (continued)

REAR VIEW

Main Page

IDEATEC POLARIS - Central Unit L & XL - Inputs

Table of Contents