IDEATEC POLARIS - Console and Module Connectivity

IDEATEC S.A. - Z.I. de Noville-les-Bois - rue Léopold Génicot 19A - 5380 Fernelmont, Belgium - Tel: +32(0)81 42 00 10 - Fax: +32(0)81 57 91 70 - E-mail: info@ideatec.be
User Guide POLARIS V1.0 - Console V1.16 - Module V2.16
Page 42
8.
POLARIS
CONSOLE 2
POLARIS
CONSOLE 1
CENTRAL
UNIT
POLARIS
UNITHERM
HD
INTERFACE
NO CENTRAL UNIT,
TOUCHSCREEN CONSOLE,
UNITHERM-HD, OPENLINK,
VFI, ADI OR MFI CAN BE
CONNECTED ON THE BUS
AFTER FSP CONSOLE(S)
8.12 FSP Console
Connecting (continued)
The FSP console is connected to the POLARIS BUS and takes place of one touchscreen console.
One console can be replaced by 1, 2 or 3 FSP consoles.
The FSP console is equivalent to one page of the POLARIS touchscreen console.The example hereby show you a
configuration with Medium Central Unit, one touchscreen console - foot mounting, one touchscreen console - panel
mounting, three FSP consoles.
8.12.1 FSP Console connection
BUS CABLE
BUS CABLE
BUS CABLE
BUS
CABLE
BUS
CABLE