Idex HALE SmartCAFS - Foam Unit 3.3, 5.0, 6.5 Foam Pump Component Group

Page 17 of 116
©HALE PRODUCTS, INC. Our policy is one of continuous development. We therefore
reserve the right to amend specifications without notice or obligation.
FOAM UNIT 3.3, 5.0, 6.5 FOAM PUMP COMPONENT GROUP
NOTE: Hale Foam unit 3.3, 5.0 or 6.5 foam pump is supplied loose for mounting by vehicle builder.
Figure 6: Foam Pump
Figure 7: In-Line Strainer
Figure 8: Water Strainer
Figure 9: ADT Selector
Figure 10: MDT Selector
Figure 11: MST Selector
Figure 12: Bottom Low Level Tank
Sensor
Figure 13: Side Low Level Tank Sensor
Figure 14: Top Low Level Tank Sensor