Idexx VetTest User Manual

*o
4FMG)FMQ(VJEF
Screen display reads: “Calibration data error.”
Cause: The software version is not current.
Solution: Make sure the latest software is in use. Updated software is routinely mailed
and should be inserted immediately upon receipt. Turn off the VetTest analyzer,
JOTFSUUIFOFXTPGUXBSFEJTLTFFQBHF#BOEUIFOUVSOPOUIFBOBMZ[FS
Call IDEXX Technical Support if your latest version still does not work.
Cause: The slide used is expired.
Solution: Check the slide expiration date and use only nonexpired slides.
Screen display reads: “Ejector problem.”
Cause: 5IFVTFETMJEFESBXFSJTGVMM
Solution: &NQUZUIFVTFETMJEFESBXFS5VSOPGGUIF7FU5FTUBOBMZ[FSBOEUIFOUVSOJU
back on to reset it.
Cause: A slide or foreign object is jammed in the rotor at the ejection point.
Solution: Remove the jammed slide or foreign object:
 .BLFTVSFUIFVTFETMJEFESBXFSJTQVTIFEBMMPGUIFXBZJOTPUIBUOP
opening is seen in front.
2. Turn off the VetTest analyzer.
3. Remove the rotor cover.
 3FMFBTFBOESFNPWFUIFUSBQQFETMJEFPSGPSFJHOPCKFDU:PVDBOHFOUMZ
turn the rotor in either direction to facilitate slide removal.
 3FQMBDFUIFSPUPSDPWFS
Important: Ensure the rotor cover is refitted correctly. Light entering the
analyzer could interfere with the result readings.
 5VSOPOUIF7FU5FTUBOBMZ[FSUPSFTFUUIFSPUPSUPJUTQSPQFSQPTJUJPO

Idexx VetTest Specifications

General

Brand	Idexx
Model	VetTest
Category	Measuring Instruments
Language	English