iDirect Evolution X1 - About; Intended Audience

iDirect Satellite Router Installation and Commissioning Guide xiii
iDX Release 3.3
About
Purpose
This document provides detailed instructions for installing and commissioning iDirect
Evolution
®
Satellite Routers at remote sites. The guide supports the following models:
• Evolution X1, X3, X5, X7, e150, and e8350
• iConnex
®
e800, and e850
Note: iNFINITI
®
Satellite Routers are not supported in iDX Release 3.2 and later.
Intended Audience
This guide is written for satellite earth station engineers, network operators, and field
technicians tasked with the installation and commissioning of iDirect Evolution Satellite
Routers.
Contents Of This Guide
This document contains the following major sections:
• “Getting Started”
• “Site Considerations”
• “Part One: iSite”
• “Part Two: Web iSite”
• “Part Three: Commissioning”
• AppendixA, “Loading Images with TFTP Server”
• AppendixB, “Disabling the PWM Voltage in iBuilder”