Need help?Do you have a question about the illumina NextSeq 500 and is the answer not in the manual?
General| Sequencing Technology | Sequencing by Synthesis (SBS) |
|---|---|
| Power Requirements | 100-240 VAC, 50/60 Hz |
| Maximum Samples per Run | up to 96 samples |
| Output | up to 120 Gb |
| Sample Type | DNA and RNA |
| Applications | Targeted Sequencing |
| Reads | Up to 400 million |
Step-by-step instructions for powering on and initializing the NextSeq 500 system.
Step-by-step guide for preparing and initiating a sequencing run, from cartridge prep to monitoring.
Instructions for thawing, inspecting, and preparing the reagent cartridge for use.
Guidance on preparing the flow cell, including bringing it to room temperature and cleaning.
How to denature, dilute, and load libraries onto the reagent cartridge for sequencing.
Steps to configure and start a sequencing run via the software interface and automated checks.
Instructions for performing manual washes: Quick Wash and Manual Post-Run Wash.
Guide for installing automatic or manual software updates for the system suite.
To Next Page
