page 22
Windows 8 Driver
Before installing the Windows 8 driver,
the installation of unsigned drivers in
Windows 8 must be enabled. Follow the
steps below.
1. Activate the charm bar, hover over
the bottom right or top right corner
of the screen, then press the Settings
Icon. Alternatively, press Windows
key and “I” to launch the charm bar.
Select Change PC Settings.
2. Select General.
3. Scroll down and select Advanced
Startup.
4. Click Restart Now. The computer will
restart to the advanced startup
menu.
5. Select Troubleshoot.
6. Select Advanced Options.
7. Select Startup Settings.
8. Select Restart.
9. The computer will restart and boot
to the startup settings menu. Option
7 should be Disable Driver Signature
Enforcement. Press 7 or F7 to boot
Windows 8 with driver signature
enforcement disabled.
10.Once these steps have been com-
pleted, follow the steps for Windows
Vista/7/10 Driver installation.
Settings
Start
Tiles
Help
Change PC settings
Troubleshoot
Advanced options
Startup Settings
Refresh or reset your PC, or use
advanced tools
Change Windows startup behavior
Startup Settings
Press a number to choose from the options below
1) Enable debugging
2) Enable boot logging
3) Enable low-resolution video
4) Enable Safe Mode
5) Enable Safe Mode with Networking
6) Enable Safe Mode with Command Prompt
7) Disable driver signature enforcement
8) Disable early launch anti-malware protection
9) Disable automatic restart after failure
Use number keys or function keys F1-F9
To Next Page
Loading...
Need help?
General
