page 27
Deleting Data
1. Individual data
Select data in Data Table and click on
Data /Delete Selected Data to delete.
* The data remains in the force gauge.
2. All data
Click on Data/Clear Table Data.
When the warning window appears click OK
to delete all the data in Data Table.
* The data remains in the force gauge.
3. Deleting the ZTS force gauge internal memory
Click on Data/Clear Gauge Memory.
When the warning window appears click
OK to delete the force gauge internal data
memory.
4. Trigger Setup
Click on Data/Trigger Setup, to set the trigger values (force/dis-
placement) for automatic acquisition. Enter trigger values in the
fields (absolute values only) and check the force/displacement
boxes to activate the trigger. When the force/displacement value
exceeds the trigger value, the force/displacement is automatical-
ly captured and displayed in the data table.
* Up to three trigger values can be set
for both force and displacement.
* The trigger activates according to the
values acquired at 10 data/second.
To Next Page
Loading...
Need help?
General
