99903514:TELESCOPIC CRANE: 4-15
SECTION 4: INSTALLATION
HYDRAULIC INSTALLATION
4.13 HYDRAULIC INSTALLATION -
MODELS 3020, 3820, 5020, 5525, 6020,
6025, 6625
Before installation, familiarize yourself with the
installation kit drawing in the parts section for
specific hydraulic components used. The
figure below is used to show major compo-
nents and general hose routings only.
1. Plumb the hydraulic components as
shown in the applicable installation kit in the
parts section. Make certain all fittings are
securely tightened and that hoses are free of
possible chafing or contact with hot or sharp
edges which could cause damage.
2. Fill the hydraulic reservoir with oil as
specifed in the Maintenance Section of the
Telescopic Crane Operation,Maintenance &
Repair Manual.
3. Check all connections for leaks.
4. Start the vehicle engine and test each
crane function individually. Conduct a visual
inspection to make certain that there are no
leaks and that everything is operating properly.
5. Check oil level in the reservoir and add oil if
necessary.
20030115
To Next Page
Loading...
Need help?
General
