Industrial Indexing Systems MSC-250 User Manual

INDUSTRIAL INDEXING SYSTEMS, INC. IB-11B012
MOTION CONTROL SYSTEM, MSC-250 USER'S GUIDE
MARCH 2003 DESCRIPTION 1 - 17
Position 0 = Normal Operation
Position 1 = Test Mode 1
Position 2 = Test Mode 2
Position 3 = Test Mode 3
Position 4 - 9 = Reserved
The Ports not mentioned in the following setting definitions stay at
their "Normal Operation" defaults.
Position A = Normal Operation
Position B = Port 3 = 19200 Baud - Packet Protocol.
Position C = Port 3 = 38400 Baud - Packet Protocol.
Position D = Port 1 = 19200 Baud - Packet Protocol.
Position E = Port 1 = 38400 Baud - Packet Protocol.
Position F = Reserved
These above port settings are only power up defaults, and can be
changed by the users' Macroprogram at any time.

Industrial Indexing Systems MSC-250 Specifications

General

Brand	Industrial Indexing Systems
Model	MSC-250
Category	Controller
Language	English