IB-11B012 INDUSTRIAL INDEXING SYSTEMS, INC.
USER'S GUIDE MOTION CONTROL SYSTEM, MSC-250
1 - 22 DESCRIPTION MARCH 2003
1.4 SPECIFICATIONS
1.4.1 PHYSICAL CHARACTERISTICS
SIZE: 15.24" high x 9.34" wide x 5.00 deep
WEIGHT: 11.25 lbs. [5.1 kg.]
OPERATING TEMPERATURE: 32°F to 140°F [0°C to 60°C]
OPERATING HUMIDITY: 30% to 90% non-condensing
INPUT POWER: 115 VAC ±15VAC, 48 to 62 Hz, 2 Amps
This device is intended to be connected
to a category II type power source.
(Fused with GDC-800MA)
BATTERY: CR2477 or DL2430
1.4.2 PERFORMANCE CHARACTERISTICS
DRIVE ENABLE CONTROL: Optically isolated
Off Voltage = 30 VDC
On Voltage = 1.5 VDC. 20 mA
DRIVE COMMAND OUTPUT: PID loop with 2.048 KHz digital signal
processing sample rate
FEEDBACK DEVICE: Digital quadrature encoder with marker
Marker Types: 1/2 Revolution = MSB
1/4 Cycle = A & B
LINE RECEIVER: Isolated Differential Receiver - required
drive of 10ma or 4V drop accross inputs.
POSITIONAL RANGE: +2,147,483,648/-2,147,483,649 counts
POSITIONAL ABSOLUTE ACCURACY: ±1 count
ACCELERATION/DECELERATION RATE: 16 to 3,276,800 counts/second/second
SPEED 0.266 to 245,760 counts/second
To Next Page
Loading...
Need help?
General