Inficon CU1000

6 | Operation CU1000 INFICON
16 / 46 CU1000-Operating-Instructions-jina54en1-09-(2404)
8 - Operation mode
Configured operation mode
Display Operation mode
VAC Vacuum
SNIF Sniffing
LOW FLOW XL sniffer adapter in LOW FLOW
HIGH FLOW XL sniffer adapter in HIGH FLOW
Standby XL sniffer adapter in HIGH FLOW on
standby
9 - Leak rate
Current measurement for the leak rate.
10 - Graph
Graphic display of the leak rate Q(t).
11 - Time axis
Time axis of the leak rate Q(t).
12 - Primary vacuum pressure (not with operation mode XL Sniffer
Adapter)
Backing pressure p1.
13 - Button "Favorite 2"
You can assign preferred parameters to this button, see “Touch screen settings
[}17]“. In the figure in “Measurement display elements [}14]“, the "Favorite 2” button
is assigned to the "Measurement view" function as an example.
14 - Button "Favorite 1"
You can assign preferred parameters to this button, see “Touch screen settings
[}17]“. In the figure in “Measurement display elements [}14]“, the "Favorite 1” button
is assigned the "Volume" function as an example.
15 - Icon for the menu
All functions and parameters of the control unit can be accessed using the "Menu"
key .
A full display of the menu of the menu is included as a file on the USB flash drive
supplied with the LDS3000.