Inficon CU1000 - Calling up Information

6 | Operation CU1000 INFICON
24 / 46 CU1000-Operating-Instructions-jina54en1-09-(2404)
Control unit Functions > Data > Recorder > Delete >
Delete files
6.3.5 Calling up information
Different information and states of the system can be called up with the info menu.
Measurement values • Preamplifier
• Environment
• TMP
Temperature • Electronic
• TMP
Energy and operating
hours
• Energy values: Information on consumption values
• Operation hours: Display for operating hours
• Supply voltages: Information on internal supply voltages
• Power supply: Information on the supply voltages of the components
History • Error, error history / warning history
• Calibration, calibration history
• TMP error, TMP history
• Warnings, active warnings
• Maintenance, maintenance history
Control unit • Version control unit: Information on the software version
• Memory: Information on available memory
• Settings: Control unit settings.
• Serial port wired: Information on the communication connection
• Data exchange: Information on the data exchange between mass spectrometer
module and the control unit
Mass spectrometer
module
• MSB (1): Information on the software version
• MSB (2): Information on operating parameters
• TMP controller (1): Information on the turbo molecular pump
• TMP controller (2): Information on the turbo molecular pump, continued
• Ion source: Information on the ion source used
• Preamplifier: Information on the preamplifier
• Preamplifier test: Information on the preamplifier test.
Interfaces • I/O module (1): Information on the software version, inputs and outputs
• I/O module (2): Visualized information to the digital inputs