7 | Decommissioning the measuring instrument INFICON
34 / 46 CU1000-Operating-Instructions-jina54en1-09-(2404)
7 Decommissioning the measuring
instrument
7.1 Disposing of the device
The device can either be disposed of by the operator or be sent to the manufacturer.
The device consists of materials that can be recycled. This option should be exercised
to prevent waste and also to protect the environment.
During disposal, observe the environmental and safety regulations of your country.
7.2 Returning the device for maintenance, repair or
disposal
WARNING
Danger due to harmful substances
Contaminated devices could endanger health. The contamination declaration serves
to protect all persons who come into contact with the device.
► Fill in the declaration of contamination completely.
1 Please do not hesitate to contact us and send a completed declaration of
contamination before sending anything to us.
ð You will then receive a return number and the shipping address.
2 Use the original packaging when returning.
3 Before sending the device, attach a copy of the completed contamination
declaration. See below.
To Next Page
Loading...
