Introduction to Digital Power Conversion
XMC4000/1000 Family
Comparison of Power Conversion Methods
Application Guide 13 V1.0, 2015-01
2.4 Infineon XMC-families for Switch Mode Power Control
The Infineon XMC power conversion oriented devices offer flexible 3-level control architectures, for
sense-compute-modulate-and-drive of any power converter topology.
Advanced analog and digital peripherals interact on events in real-time via a hardware matrix,
supported by DMA, Software, DSP (Digital Signal Processing) or over a network.
Figure 4 The Power Conversion Oriented XMC Devices 3-Level Architecture Control Loop
The XMC series for power control meets the performance challenges and demands of today’s
embedded control applications. The high performance, real-time capability is achieved with an ARM-
Cortex architecture, with or without DSP, and a Floating Point Unit (FPU).
To Next Page
Loading...
