7
2 Description of the device
Features
The Chimp is a hybrid programmer based tracking console.
Hybrid means it may be used to either control conventional or moving light fixtures in the same easy-to-
use way.
Being a programmer based Console, you always have the chance to override the Chimps output
manually, as the programmer always has precedence. To “empty” the programmers contents, you need
to hit the clear button three times, or press it for a longer period of time.
“Tracking” as opposed to non-tracking defines that values are tracked over from one cue in a cuelist to
another (Ie. a fixture has been brought to a level of 50% in cue #1, and it will remain at this level
proceeding through the cuelist until you change it to a different level). This is default behavior, however
you still have the option to set cuelists to a “Non-Tracking” mode on a per cuelist basis.
22” Full Color Touchscreen
Yes (By switching direction)
Metal & Flame retardant plastic
Optional accessories
To Next Page
Loading...
