Do you have a question about the InFocus IN119HDxa and is the answer not in the manual?
3D | Yes |
---|---|
Supported video modes | 480i, 480p, 576i, 576p, 720p, 1080i, 1080p |
Analog signal format system | NTSC, PAL, SECAM |
Number of built-in speakers | 1 |
Native aspect ratio | 16:9 |
Projection distance | 2 - 10 m |
Projection technology | DLP |
Supported aspect ratios | 4:3, 16:10 |
Contrast ratio (typical) | 28500:1 |
Screen size compatibility | - \ |
Projector native resolution | 1080p (1920x1080) |
Vertical synchronization (max) | 85 kHz |
Vertical synchronization (min) | 24 kHz |
Keystone correction, horizontal | -40 - 40 ° |
Horizontal synchronization (max) | 91.146 kHz |
Horizontal synchronization (min) | 15.375 kHz |
Projector brightness (economic mode) | 2800 ANSI lumens |
Lamp power | 195 W |
Light source type | Lamp |
Lamp power (economic mode) | 160 W |
Service life of light source | 5000 h |
Service life of light source (economic mode) | 7000 h |
Placement | Desktop |
Product type | Standard throw projector |
Product color | Black |
Market positioning | Home cinema |
Cable lock slot type | Kensington |
Focus | Manual |
Offset | 116 % |
Throw ratio | 1.47:1 |
Focal length range | - mm |
DVI port | No |
MHL version | 2.1 |
HDMI version | 1.4a |
Audio (L/R) in | 0 |
USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
Noise level | 24 dB |
Cables included | AC |
AC input voltage | 100 - 240 V |
AC input frequency | 50 - 60 Hz |
Power consumption (standby) | - W |
Operating altitude | 0 - 3048 m |
Operating temperature (T-T) | 5 - 40 °C |
Depth | 223.5 mm |
---|---|
Width | 315 mm |
Height | 101.6 mm |
Weight | 2500 g |
Package depth | 304.8 mm |
Package width | 362 mm |
Package height | 190.5 mm |
Package weight | 3300 g |
General warnings and precautions for safe operation.
Detailed safety advice and warnings for projector use.
Step-by-step instructions for PC/laptop connection.
Instructions for connecting players and receivers.
How to connect and set up 3D sources.
Steps for turning the projector on and off.
How to adjust projection height, zoom, and focus.
Adjustments for display mode, brightness, contrast, etc.
Settings for aspect ratio, edge mask, zoom, and 3D format.
Procedure for replacing the projector lamp.