49
English
User Controls
Options |
Lamp Settings
Lamp Hour
Display the projection time.
Lamp Reminder
Choose this function to show or to hide the warning message
when the changing lamp message is displayed.
The message will appear 30 hours before suggested replacement
of lamp.
Lamp Mode
` Bright: Choose “Bright” to increase the brightness.
` Eco.: Choose “Eco.” to dim the projector lamp which will lower
power consumption and extend the lamp life.
` Dynamic: Choose “Dynamic” to dim the lamp power which will
be based on brightness level of the content and adjust lamp
power consumption between 100% and 30% dynamically. The
lamp life will be extended.
Lamp Reset
Reset the lamp hour counter after replacing the lamp.
Exit
Exit the Lamp Settings menu.
When ambient
temperature is
over 40°C in
operating, the
projector will
switch to Eco
automatically.
“Lamp Mode” can
be indipendently
set for 2D and
3D.
IMAGE
DISPLAY
SETUP
OPTIONS
OPTIONS
Lamp Hour
UpDown Select Exit
Exit
Lamp Settings
O
Dynamic
Lamp Reminder
Lamp Mode
Lamp Reset
To Next Page
Loading...
