47
English
User Controls
Test Pattern
Display a test pattern. There are Grid and White Pattern.
IR Function
` O: Choose “O”, the projector can’t be operated by the
remote control from front or top IR receiver. By selecting “O”,
you will be able to use the Keypad keys.
` On: Choose “On” the projector can be operated by the remote
control from the top and front IR receivers.
` Top: Choose “Top”, the projector can be operated by the
remote control from top IR receiver.
` Front: Choose “Front”, the projector can be operated by the
remote control from front IR receiver.
Background Color
Use this feature to display a “Black”, “Red”, “Blue”, “Green”, or
“White”, screen when no signal is available.
12V Trigger
` O: Choose “O” to disable the trigger.
` On: Choose “On” to enable the trigger.
` Auto 3D: When “Auto 3D” is enabled, the projector will
automatically detect when a 3D image is shown and will
activate the trigger on this port.
12V Out
GND
Reserved
Reset
Choose “Yes” to return the display parameters on all menus to the
factory default settings.
Exit
Exit the OSD menu.
“Front” and “Top”
can’t be selected
under standby
mode.
12V Trigger
supports up to a
250ma relay.