InFocus IN119HDxa - Installing and Cleaning the Dust Filter

58
English
Appendices
Installing and Cleaning the Dust
Filter
Dust lters are
only required/
supplied in
selected regions
with excessive
dust.
Dust lter is an
optional service
part.
Cleaning the Dust Filter
We recommend cleaning the dust lter every three months;
clean it more often if the projector is used in a dusty
environment.
Procedure:
1. Switch o󰀨 the power to the projector by pressing the “ ” button on
the Keypad of the projector or on the remote control.
2. Disconnect the power cord.
3. Remove the dust lter slowly and carefully.
4. Clean or replace the dust lter.
5. To install the dust lter, reverse the previous steps.
1
2
Installing the Dust Filter