Operation 39
FUNCTION
(default setting/
value)
DESCRIPTION (default setting/value)
Tint
(0)
Adjusts the red and green color tones of the image. See
"Adjusting Tint" on page 30 for details.
The function is only available when Video or S-Video with NTSC
system is selected.
Sharpness
(15)
Adjusts the image to make it look sharper or softer. See
"Adjusting Sharpness" on page 30 for details.
Brilliant
Color
(On)
Adjusts white peaking while maintaining correct color
presentation. See "Adjusting Brilliant Color" on page 30 for
details.
Color
Temperature
(T1)
See "Selecting a Color Temperature" on page 30 for details.
3D Color
Management
See "3D Color Management" on page 31 for details.
Save
Settings
Saves the settings made for User 1 or User 2 mode.
Quick Auto
Search
(On)
See "Switching input signal" on page 23 for details.
Presentation
Timer
(Off)
Reminds the presenter to finish the presentation within a
certain time frame. See "Setting the presentation timer" on
page 32 for details.
Language
(English)
Sets the language for the On-Screen Display (OSD) menus.
See "Using the menus" on page 20 for details.
Projector
Position
(Front Table)
The projector can be installed on a ceiling or behind a screen,
or with one or more mirrors. See "Choosing a location" on page
9 for details.
Auto Power
Off
(Disable)
Allows the projector to turn off automatically if no input signal is
detected after a set period of time. See "Setting Auto Power
Off" on page 44 for details.
2. PICTURE menu
3. SOURCE
menu
4. SYSTEM SETUP: Basic
menu