Operation40
FUNCTION
(default setting/
value)
DESCRIPTION (default setting/value)
Blank Timer
(Disable)
Sets the image blank time when the Blank feature is activated,
once elapsed the image will return to the screen. See "Hiding
the image" on page 33 for details.
Panel Key
Lock
(Off)
Disables or enables all panel key functions except POWER
on the projector and keys on the remote control. See "Locking
control keys" on page 33 for details.
Timer
Controller
(Disable)
Sets the auto-shutdown timer. The timer can be set to a value
between 30 minutes and 12 hours.
Splash
Screen
(InFocus logo)
Allows you to select which logo screen will display during
projector start-up. Three options are available: InFocus logo,
Black screen, or Blue screen.
Quick
Cooling
(On)
Selecting On enables the function and the projector cooling
time will be shortened to a few seconds.
If you attempt to restart the projector right after the quick
cooling process, it may not be turned on successfully and will
rerun its cooling fans.
High Altitude
Mode
(Off)
A mode for operation in high altitude areas. See "Operating in a
high altitude environment" on page 34 for details.
Audio
Settings
Mute (Off)
Volume (5)
See "Adjusting the sound" on page 34 for details.
Menu
Settings
Menu display time (15 sec)
Sets the length of time the OSD will remain active after your last
key press. The range is from 5 to 30 seconds in 5-second
increments.
Menu position (Center)
Sets the On-Screen Display (OSD) menu position.
4. SYSTEM SETUP: Basic
menu
I
I
5. SYSTEM SETUP: Advanced menu