Terminal User Guide
Page 76
iWL250 User Guide
Copyright© 2019 Ingenico
First Supervisor Menu Screen
PRINT CONF
Allows the terminal to print the configuration
of any additional apps installed i.e.
TruRating
PASSWORD
Allows the various codes in the terminal to
be reset or changed. Enters the
PASSWORD menu - see next section.
CONFIG
Allows the access to various extended
configuration options. Enters the CONFIG
menu - see next section.
LOGON
Allows the terminal to perform a test with
some, or all, of the acquirers loaded on the
terminal. Do not use this feature unless
instructed to do so by the terminal Helpdesk.
Second Supervisor Menu Screen (press Menu once)
SHORT CUT
Allows access to advanced configuration
options. Enters the SHORT CUT menu -
see next section.
TIPS
Allows the Gratuity/Tip mode to be
switched on and off. Setting TIPS to ON,
sets OP MODE to LATE.
OP MODE
Allows the setting of when the terminal will
contact the acquirer for authorisation
during the transaction. Gratuity/Tip mode
is only available in LATE mode. Setting
OP MODE to EARLY, sets TIPS to OFF.
CALL TMS
Immediately sets off a configuration data
call to the Terminal Management System
(TMS). Do not use this feature unless
instructed to do so by the terminal
Helpdesk.
To Next Page
Loading...
