Terminal User Guide
Page 77
iWL250 User Guide
Copyright© 2019 Ingenico
Third Supervisor Menu Screen (press Menu twice)
INTL
Allows the international dialling code to be
set. Do not use this feature unless
instructed to do so by the terminal
Helpdesk.
SALETYPE
Allows the default transaction type to be
set, so the transaction type will begin as
soon as a card is swiped or inserted from
the idle screen. If REFUND is set then the
Supervisor password check will not be
done.
TERM PARAM
Allows the setting of internal terminal
options. Do not use this feature unless
instructed to do so by the terminal
Helpdesk.
UPGRADE
Immediately sets off a software upgrade
call to the Terminal Management System
(TMS). Do not use this feature unless
instructed to do so by the terminal
Helpdesk.
Fourth Supervisor Menu Screen (press Menu three times)
DATE TIME
Allows the date and time to be set. The date
and time is
automatically updated when a
successful TMS call is made.
BACKLIGHT
Allows the setting of the time taken after a
key is pressed before the backlight turns off.
AUTO-OFF
Allows the setting of the time taken after a
key is pressed before the terminal
power save mode.
RELEASE
Prints a summary report of software
versions loaded on the terminal. Do not use
this feature unless instructed to do so by the
terminal Helpdesk.
To Next Page
Loading...
