Ingenico iWL200 Series - Shortcut Menu Screen; Second Shortcut Menu Screen

Troubleshooting Terminal User Guide
82
Third Supervisor Menu Screen (press menu twice)
INTL
F1
Allows the international dialling code to be set. Do
not use this feature unless instructed to do so by the
terminal Helpdesk.
SALETYPE
F2
Allows the default transaction type to be set, so the
transaction type will begin as soon as a card is
swiped or inserted from the idle screen. If REFUND is
set then the Supervisor password check will not be
done.
TERM PARAM
F3
Allows the setting of internal terminal options. Do
not use this feature unless instructed to do so by the
terminal Helpdesk.
UPGRADE
F4
Immediately sets off a software upgrade call to the
Terminal Management System (TMS). Do not use
this feature unless instructed to do so by the
terminal Helpdesk.
Fourth Supervisor Menu Screen (press menu three times)
DATE TIME
F1
Allows the date and time to be set. The date and
time is automatically updated when a successful
TMS call is made.
BACKLIGHT
F2
Allows the setting of the time taken after a key is
pressed before the backlight turns off.
AUTO-OFF
F3
Allows the setting of the time taken after a key is
pressed before the terminal enters power save
mode.
RELEASE
F4
Prints a summary report of software versions loaded
on the terminal. Do not use this feature unless
instructed to do so by the terminal Helpdesk.