User’s manual
Using the Prime system 25
• Manual - the temperature set by the user is valid for 24 hours per day, for 7 days per
week.
• Daily - the temperature set by the user is valid during the selected hours of the day for 7
days per week.
• Weekly - the temperature set by the user is valid during the selected hours of the day on
specific days of the week.
• Antifreeze - this is a forced operation. If the temperature drops below 5°C, the output
connected to the heating system will activate.
This function can be managed from the:
•LCD Keypad (paragraph 6-6-12 Thermostat)
• Alien keypad (paragraph 6-7-13 Thermostat
• AlienMobile Application
• InimCloud
5-11
Listen-in
Users communicating with the control panel over-the-phone can activate the Listen-in
function and eavesdrop on the protected premises. This is made possible by the microphones
on voice-capable keypads which have at least one partition in common with the entered
telephone code.
Shortcut n.10 must be assigned (by the installer) to one of the number keys relating to the
code that will generate this operation (refer to paragraph 8-3-5 Listen-in).
This function can be activated over-the-phone only.
5-12
Partition status enquiry
During a telephone communication with the control panel or by accessing a keypad with an
LCD display with voice functions, the user can listen to the status of arming/disarming the
partitions.
The control panel will announce the armed/disarmed status of the partitions the entered PIN
is assigned to.
This operation can be implemented through:
•LCD Keypad (paragraph 6-6-15 Partition status enquiry)
• Telephone (paragraph 8-3-6 Partition status enquiry)
To Next Page
Loading...
Need help?
General
