60 Graphic maps
Anti-intrusion control panels
Chapter
10
Graphic maps
The Prime monitoring functions are based on graphic maps which can accessed by the end-
user through an Alien keypad or web interface.
The graphic maps are linked together in a tree structure that allows you to view the status of
every part of the security system status and interact with it through the icons shown.
The Alien keypad can manage up to 10 maps (revisions below 2.00 can manage up to 5 maps)
and the web interface up to 20. Each map supports up to 20 objects/buttons represented by
icons.
The type of icon used and its function as a default button is described in the following table. It
is possible to change these functions during the programming phase and associate each icon
with a descriptive string or even make use of customized icons.
Note
The Graphic map functions require installation of a micro-SD card.
If this is not installed the
MAPS
button will show the message “no SD-card” and the application will not
start.
Via Alien
Access the “Apps” section, then the “Maps” section.
Via Web
browser
Access the “Graphic maps” section in the home page.
Table 10-1: Graphic map icons at default
Subject Icon Button
Link
Link to the Alien home page
Map link
Partition
Partition armed in Away
mode
After a valid code entry a window will open
where you can select the arming mode you
wish to apply.
Partition armed in Away
mode
Partition armed in Instant
mode
Partition disarmed
Partition alarm/tamper
memory
To Next Page
Loading...
