User’s manual
Shortcuts 17
4-1
Keypad shortcuts
The installer can program each LCD keypad with up to 12 shortcuts associated with 4 function
keys . The shortcuts are identified by icons which appear on the lower
part of the display. Arrows to the right and left of the icons indicate that keys , , will allow
you to view and use other shortcuts in cases when there are more than 4 function keys.
The 12 keypad shortcuts can be activated in 4 different ways, as follows.
A- By ALL.
Pressing the respective key , ..., will activate the shortcut instantly
without code entry. The shortcut will affect all the keypad partitions.
B- By ALL with confirmation request.
Pressing the respective key , ..., will prompt the system to ask you if you
want to continue or not. If you press the shortcut will activate instantly, if you
press or the operation will be abandoned. This method protects against
accidental operations. The shortcut will affect all the keypad partitions.
C- Code users only.
After pressing the respective key , ..., , a valid code entry will be
required, the shortcut will activate after code recognition. The shortcut will affect
the partitions common to both the keypad and code.
D- Code users only when activation of the shortcut lowers system security.
If a shortcut involves a scenario that completely disarms a partition, or switches a
partition from Away mode to Stay mode, the security of your system will obviously
be at risk, therefore, the system will request code entry. The shortcut will affect the
partitions common to both the keypad and code.
To activate a shortcut, press the key that is associated with the shortcut icon: , ..., .
The system will either activate the shortcut instantly (case A), or will request explicit
confirmation (case B), or will request code entry (cases C and D).
Alien user interfaces do not have function keys , nor do they provide
access to certain functions via shortcuts. However, the screen provides buttons which, with a
single tap, activate functions and applications. For further details refer to paragraph 6-7
Operations via an Alien keypad.
Disable code
Disables one of the config-
ured codes
which code Not available Not available Not available Not available Not available Available
Enable code
Enables one of the configured
codes
which code Not available Not available Not available Not available Not available Available
Disable key
Disables one of the config-
ured keys
which key Not available Not available Not available Not available Not available Available
Enable key
Enables one of the configured
keys
which key Not available Not available Not available Not available Not available Available
Activate ther-
mostat
Activates the thermostat of
one of the keypads in the
selected operating mode
Keypad
which mode
Not available Not available Not available Not available Not available Available
Deactivate
thermostat
Deactivates the thermostat of
one of the keypads
Keypad Not available Not available Not available Not available Not available Available
Dimmer up
Increases the voltage value
on a dimmer output by 5%
which output Not available Not available Not available Not available Not available Available
Dimmer
down
Decreases the voltage value
on a dimmer output by 5%
which output Not available Not available Not available Not available Not available Available
Table 4-1: Shortcut list
Shortcut on keypad on code on reader on keys on event
description function parameter n. Icon String via keypad
over-the-
phone
CONTINUE?OK=YES
18:23 01/01/2019
DASIDASI--
18:23 01/01/2019
DASIDASI--
18:23 01/01/2019
DASIDASI--
Type in Code
******
Shortcut
activation
Shortcut
activation
Shortcut
activation
A
B
C
D
To Next Page
Loading...
Need help?
General
