User’s manual
Keypads 31
6-2
Using the keys
The following section describes how the keys are normally used. Some of the keys may have
specific functions which will be indicated when necessary.
6-2-1
Emergency functions
The control panel provides 3 special functions which can be activated from the keypad:
• Fire Emergency
• Ambulance Emergency
• Police Emergency
Activation of these keys will generate the associated events and actions (e.g. activation of
outputs and calls).
To activate an emergency request, press an hold for 3 seconds the required key combination
and wait for the confirmation beep, as follows:
Note
If any two function keys are pressed at the same time, the functions relating to the icons associated with
the keys will not be activated.
Table 6-5: The keypad keys
Keys Name Typical application
Number keys
Used to type in User PINs
OK
Confirms the selected item (parameter, etc.)
UP, DOWN
These keys allow you to scroll the menu lists and/or adjust graphically displayed parame-
ters (for example, keypad or volume adjustment).
LEFT, RIGHT
These keys allow you to scroll along the parameters or data being viewed (for example,
when viewing partitions in the events log or when selecting partitions in the arm/disarm
menu).
C
This key allows you to step back on the open menu without confirming the selected
options (parameters, etc.) or, after entering a user PIN and pressing
OK
, to scroll through
the 3 user-menus (refer to paragraph 3-1 User Codes).
ESC
This key exits the user menu definitely without confirming any selected parameters, etc.
ENABLE
This key enables options (refer to paragraph 6-6-4 Activations)
DISABLE
Disables options
F1, F2, F3, F4
or function keys
These keys activate the shortcuts associated with the icons.
They can also be used as Emergency keys (refer to paragraph 6-2-1 Emergency func-
tions).
Table 6-6: Emergency keys
Emergency Key combinations Alien keys
Fire
+
Ambulance
+
Police
+
To Next Page
Loading...
