User’s manual
Graphic maps 61
Zone
Zone shorted/tamper
Zone alarm/tamper mem-
ory
After a valid code entry the zone will change its
activation status
Zone in stand-by status
Zone in alarm status
Zone disabled/bypassed
Output
Output activated
Output switches status
Output deactivated
Scenario
Scenario active /
Scenario inactive
After a valid code entry you can activate the
scenario
Ongoing fault
Scenario active
Accesses the faults viewing section
Scenario inactive
Thermostat
Thermostat disabled
Accesses the reader thermostat management
section
Thermostat set to manual
mode
Thermostat set to daily
mode
Thermostat set to weekly
mode
Thermostat set to anti-
freeze mode
Reset partitions
After a valid code entry you can deactivate
immediately the outputs relative to alarm and
tamper events and clears the alarm and tam-
per memory
Clear call queue
After a valid code entry you can clear the call
queue completely and interrupt any ongoing
call.
Stop alarms
After a valid code entry you can deactivate
instantly the outputs activated by zone/parti-
tion alarm and tamper events and system tam-
per events.
View events log
After a valid code entry you can access the
events log
Table 10-1: Graphic map icons at default
Subject Icon Button
To Next Page
Loading...
