User’s manual
Keypads 27
The keypad is the most complete and versatile device for system management.
For each keypad the installer assigns the partitions it belongs to and the sections of the
system that user codes can access through it.
The graphic display shows the necessary information and provides a user-interface based on a
user menu and icons for the operations to be performed.
ACCESSING THE
KEYPAD
Each user, who enters a valid PIN code on the keypad that is recognized by the control panel, can
be enabled to operate on the system or on part of it.
In order for code users to access their user menus, they must first validate their codes. This
can be done by typing-in the code PIN and pressing the OK button.
SHORTCUT
It is possible to extend the use of some of the system shortcuts to users without assigned
codes.
By means of the keypads it is possible to use the shortcut functions associated with the keys
, these operations are usually reserved for authorized users (users
with assigned codes).
The Alien touch screen user interface provides shortcuts such as the activation of scenarios,
and also applications such as device settings, which can be activated by the buttons displayed
on the screen without code entry.
CHRONO-
THERMOSTAT
If a keypad is equipped with a thermostat, it can also be programmed to control the
programmable chronothermostat function. This function allows you to set up zone
management (one zone per keypad) of the heating/air-conditioning system.
The temperature is read by a built-in temperature sensor. The hysteresis is fixed at 0.4°C.
CONCEPT/G
The Concept/G keypad provides a further two options relating to direct user access.
A special feature allows activation of the backlight of the display and keys when users
approach the keypad. This is achieved through a proximity sensor which can be activated by
pressing keys and simultaneously and deactivated by pressing and .
The other option, block/unblock keypad, can be achieved by pressing key for 3 seconds.
If the block keypad option is enabled, the display will show the icon opposite.
WIRELESS
TERMINALS
The Aria/W wireless keypad provides all the necessary functions for the control and
management of a Prime installation equipped with an Air2 system, which it can interface with
through the Air2-BS200 transceiver.
It is equipped with an accelerometer which provides both anti-tamper and “wakeup” from
stand-by functions, whereas the brightness sensor controls the display and key brightness
optimally with respect to the surrounding environment. Moreover, it has an automatic
shutdown function in the event of loss of wireless connection.
BACKLIGHTING
The backlight of Air/W keypads can be programmed from the keypad in accordance with the
measured ambient brightness. The keypad manages two different brightness settings:
•Day
•Night
These settings can be programmed via the “Keypad” option in the User menu.
ALIEN KEYPAD
Alien is a colour touch-screen user interface. Two versions are available, the 4.3 inch Alien/S
model and the 7 inch Alien/G model. Access to the Alien keypad functions is achieved by
tapping the respective buttons displayed on the screen.
Graphics management provides ample room for customization, with skin and background
selection and image rotation. You can also control the screen brightness, contrast and image
transparency.
The Alien user-interface provides the following user applications:
• photo-frame application, that allows viewing of slide-shows of all the images contained in
the SD-card
• graphic maps for the supervision of the entire system monitored by the Prime control panel
through a graphic layout containing images, icons and buttons on the display
• alarm and memo functions, programmable directly by the user, which generate audible
signals and display popups
Type in Code
***---
User Code
Manage alarms
Arm/Disarm op.
Voice functions
To Next Page
Loading...
