User’s manual
Readers and Keys 51
7-3-3
Outputs management
The activations and deactivations that users can perform via proximity readers or keys depend
on the programming of the associated shortcuts.
Via Reader
Hold a valid key in the vicinity of the reader until the reader LEDs or display indicates “Activate
output” (shortcut n.5), “Deactivate output” (shortcut n.6).
Via Wireless
key
Push the respective button on the wireless key and verify the outcome of the requested
operation, as described in paragraph 7-2-1 Wireless keys (remote-control keys).
7-3-4
Overtime request
The overtime request via proximity reader or key is possible through one of the appropriately
programmed associated shortcuts.
Via Reader
Hold a valid digital key in the vicinity of the reader until the reader LEDs or display indicates
"Overtime" (shortcut n.7).
Via Wireless
key
Push the respective button on the wireless key and verify the outcome of the requested
operation, as described in paragraph 7-2-1 Wireless keys (remote-control keys).
To Next Page
Loading...
Need help?
General
