2.12 Handpieces Labels
The Handpiece certifications and identification labels are attached to connectors on
the Handpieces. It states that the product conforms to the performance standards,
and indicates the manufacturer’s name, date of manufacturing, model and serial
number of the handpiece. The following labels are located on the Handpieces:
Manufacturer identification labeling is placed on the Hand pieces:
▪ Laser aperture label placed on the Handpiece connector.
▪ Manufacturer identification labeling placed on the Handpiece connector.
Figure 2-8: Lumecca Handpieces Label for IPL Aperture
Figure 2-9: DiolazeXL and Vasculaze Handpieces Label for Laser Aperture
To Next Page
Loading...
