7. Press Standby icon that will change to Ready.
8. Press the Footswitch and then press trigger button on the Handpiece to start
the treatment for DiolazeXL and Vasculaze; After pressing the foot-switch the
icon will change to Armed.
9. After pressing the Hand Trigger the icon will change to Active Trigger and the
laser can be emitted to start the treatment.
10. Lasing is apparent by blue light running around the window in the handpiece
and by an audio signal.
11. During treatment, when the laser window is heating up, the System will go into
Cooling Down mode. Wait until the icon will change to Standby mode.
5.2 System Shutdown
▪ To shut down the System turn the On-Off switch off.
▪ Turn the Main Power switch off at the end of the day.
▪ In case of an emergency, the System may be switched off instantly by pressing
the red Emergency Stop Button on the right side of the System’s front panel.
To Next Page
Loading...
