EasyManua.ls Logo

InMode Optimas - Forma Pre-treatment Steps

InMode Optimas
92 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Section 10: Forma Treatment Information
62 of 87
Thoroughly clean the Handpiece with 70% alcohol absorbed pad for at least 30
sec and repeat as necessary.
Leave it for complete drying.
Pre-Use Check:
Before each use of the Handpiece, the device must pass the following:
Check to ensure proper cleaning and drying of the Handpiece.
Inspect all components of the Handpiece for visible damage.
10.5 Pre-treatment Recommendations
During the patient’s first visit the treating attendant should:
Complete or update the patient’s medical and physical history.
Exclude from treatment anyone with the listed contraindications.
Determine why the patient is seeking treatment and what his/her expectations
are.
Inform the patient about treatment arrangement, typical treatment results and
possible side effects and discomfort.
Instruct the patient about the safety warnings.
The patient should discontinue any irritant topical agents for 2-3 days prior to
treatment and if medically permitted, anticoagulants should be stopped 1-2
weeks prior treatment.
Clean the face, remove creams/lotions and makeup, and dry the skin.
Photograph the patient.
Mark the treatment area.
Clean the handpiece’s parts that come in contact with the skin with 70% alcohol.
Long and dense hairs may affect the treatment and may be shaved
according to the physician’s discretion.
10.6 Treatment Recommendations
1. Ensure that the skin is clean and dry.

Table of Contents

Related product manuals