▪ Instruct the patient about the safety warnings.
▪ Advise the patient to avoid skin tanning for 3-4 weeks prior to the treatment and
use at least 30 SPF sunblock during outdoor activity at daylight hours.
▪ The patient should discontinue any irritant topical agents for 2-3 days prior the
treatment.
▪ Stop anticoagulants 7-10 days prior to treatment, if medically permitted.
▪ Photograph the patient.
▪ Mark the treatment area.
▪ Clean the handpieces parts that come in contact with the skin with 70% alcohol.
The patient may shave the area to be treated. Long and dark hair may
absorb light and leave burn marks on the skin.
8.5 Tip Cleaning Instructions Prior to Use
▪ Clean the light guide with 70% alcohol absorbed pad for at least 30 sec.
▪ Leave it to dry completely.
8.6 Test Spots
A small test spot with energy setting according to current QRG (Quick Reference
Guide) should be performed in a non-conspicuous area of the treatment site, prior to
the first complete session. Test spot is performed to establish the following
requirements:
▪ Confirm the patient's suitability for treatment:
– For skin type I – IV wait 10-15 minutes before assessing the skin
response.
– Do not treat skin type V-VI.
To Next Page
Loading...
