Chapter 1 Safety Information and Precautions
In this manual, the notices are graded based on the degree of danger:
z
indicates that severe personal injury or even death may result due to
improper operation.
z
indicates that personal injury or equipment damage may result due to
improper operation.
Read this chapter carefully so that you have a thorough understanding. Installation,
commissioning or maintenance must be performed in conjunction with this chapter.
Inovance will assume no liability or responsibility for any injury or loss caused by improper
operation.
1.1 Safety Information
1.1.1 Before Installation
z Do not install the equipment if you find water seepage, component missing or damage.
z Do not install the equipment if the packing list does not conform to the product you received.
z Handle the equipment with care during transportation. Otherwise, the equipment may be
damaged.
z Do not use the equipment with damage or missing components. Otherwise, personal injury may
result.
z Do not touch the components with your hands. Otherwise, static electricity damage may result.
1.1.2 During Installation
z Install the equipment on incombustible objects such as metal, and keep it away from
combustible objects. Otherwise, a fire may result.
z Do not loosen the fixed screws of the components, especially the screws with red mark.
z Do not drop wire end or screw into the equipment. Otherwise, the equipment may be damaged.
z Install the equipment in places free of vibration and direct sunlight.
z Arrange the installation positions properly when two AC drives are laid in the same cabinet to
ensure the cooling effect.
efesotomas
on.com