Preparations for Installation
‑37‑
Name Model Order No.
Supported AC
Drive Model
Description
Mount
ing
accesso
ry
Through‑hole
mounting
bracket
MD500‑AZJ‑A1T1 01040072 T1 The bracket is used for through‑
hole mounting. It applies only to T1
to T9 models.
MD500‑AZJ‑A1T2 01040073 T2
MD500‑AZJ‑A1T3 01040074 T3
MD500‑AZJ‑A1T4 01040075 T4
MD500‑AZJ‑A1T5 01040001 T5
MD500‑AZJ‑A1T6 01040002 T6
MD500‑AZJ‑A1T7 01040003 T7
MD500‑AZJ‑A1T8 01040004 T8
MD500‑AZJ‑A1T9 01040005 T9
Grounding
bracket of cable
shield
MD500‑AZJ‑A2T1 01040085 T1 The accessory is used for re‑fixing
the power cable and stable
grounding of the shield in 360°. It
applies only to T1 to T9 models.
MD500‑AZJ‑A2T2 01040088 T2
MD500‑AZJ‑A2T3 01040083 T3
MD500‑AZJ‑A2T4 01040082 T4
MD500‑AZJ‑A2T5 01040081 T5
MD500‑AZJ‑A2T6 01040086 T6
MD500‑AZJ‑A2T7 01040087 T7
MD500‑AZJ‑A2T8 01040084 T8
MD500‑AZJ‑A2T9 01040089 T9
Mounting guide
rail
MD500‑AZJ‑
A3T10
01040009 T10 and T12 The option is used for installing the
AC drive in a cabinet. For T10
models and models above T10, it is
recommended that a guide rail be
used to push the AC drive into the
cabinet.
U/V/W output
copper busbar
MD500‑TP‑T10 01040125 T10 MD520 models excluding that with
the base (‑L) are delivered with the
U/V/W output copper busbar.
MD500‑TP‑T11 01040126 T11
MD500‑TP‑T12 01040127 T12
To Next Page
Loading...
