Preparations for Installation
‑49‑
1.4.3 Grounding Bracket of Cable Shield
The grounding bracket of cable shield is optional and can be purchased separately as
required (applicable to T9 models and below).
1.4.4 Bottom Mounting Bracket
T10 to T12 models come with a bottom mounting bracket. When the AC drive is
installed in a cabinet, a bottom mounting bracket is required for fixing the AC drive to
the cabinet rack base. The dimensions of bottom mounting brackets vary with the
power rating, weight, and size of the AC drive, as shown in the following figures.
The bottom mounting bracket provided with the AC drive is applicable to the cabinet
with a depth of 600 mm.
Figure 1‑28 Dimensions of the bottom mounting bracket for T10 models
To Next Page
Loading...
