Unpacking Inspection
‑65‑
Figure 3‑3 Upright position of the cabinet
● Suitable hoisting gear operated by trained personnel is required due to the heavy
weight of the cabinet.
● Where applicable, use a forklift and a crane that have a carrying capacity greater
than the cabinet weight to transport the cabinet.
● The cabinet must be carried on a wooden pallet when transported with the
forklift. Do not remove the cabinet from the pallet during transport. Adjust the
spacing between the forks to a distance greater than half the length of the cabinet.
● Considering the weight and length of the cabinet, use the lifting beam (or lifting
lug) fixed at the top of the cabinet and the wooden pallet at the bottom of the
cabinet to help lift the cabinet. The lifting strap of the crane must pass through the
pallet under the cabinet, with the relief height less than or equal to 0.3 m.
● A hydraulic vehicle cannot move for a long distance or move on a slope.
● The cabinet must be held by hands on the left and right sides during movement.
To Next Page
Loading...
