Inovance MD520 Series - Page 112

EtherCAT Communication
‑111‑
Parameter Parameter
Name
Value Range
Setpoint Description
F0‑28
Serial
communication
protocol
0: Modbus
protocol
1:
Communication
card network
bridge protocol
1
Select the
special
communication
card network
bridge protocol
as the serial
communication
protocol.
F0‑02
Command
source
0: Operating
panel
1: Terminal
2:
Communication
2
Set the
command
source to
communication.
F0‑03
Main frequency
reference source
0: Digital setting
(non‑retentive
at power failure)
1: Digital setting
(retentive at
power failure)
2: AI1
3: AI2
4: AI3
5: Pulse
reference (DI5)
6: Multi‑
reference
7: Simple PLC
8: PID
9:
Communication
9
Set the target
frequency
through
communication.