Inovance MD520 Series - Using an MD500-EN1 Expansion Card on an Inovance AM600 Master

EtherNet/IP Communication
‑253‑
The IP address is written to the device.
9.7.2 Using an MD500-EN1 Expansion Card on an Inovance AM600 Master
In this example, InoProShop V1.5.2 is used, the master is AM600, and the IP address
and other information have been configured in advance according to the guide. You
can use either network port on the expansion card. To use the expansion card, set F0‑
02 to 2, F0‑03 to 9, FD‑00 to 9, and FD‑01 to 3 on the AC drive.