Inovance MD520 Series - Page 236

EtherNet/IP Communication
‑235‑
Parameter No. Parameter Name
Value Range Description
FD‑37
DHCP function
0: Disabled
1: Enabled
Defines the DHCP
function of the
EtherNet/IP
expansion card. After
the DHCP function is
enabled, the
following IP address
configuration
parameters are
invalid.
FD‑38 to FD‑41
Expansion card IP
address
0–255
Defines the IP
address of the
EtherNet/IP
expansion card.
FD‑42 to FD‑45
Expansion card
subnet mask
0–255
Defines the subnet
mask of the
EtherNet/IP
expansion card.
FD‑46 to FD‑49
Expansion card
gateway address
0–255
Defines the gateway
address of the
EtherNet/IP
expansion card.
The IP address can be a static IP address or DHCP dynamic IP address. The IP mode is
defined by FD‑37. The static IP address is set by FD‑37 to FD‑39. For example, if the
static IP address is 192.168.0.6, the subnet mask is 255.255.255.0, and the gateway is
192.168.0.1, set as follows:
Parameter Function
Setpoint
FD‑37
DHCP function
0
FD‑38
Most significant byte of the
IP address
192
FD‑39
Second most significant byte
of the IP address
168
FD‑40
Third byte of the IP address
0
FD‑41
Least significant byte of the
IP address
6
FD‑42
Most significant byte of the
subnet mask
255
FD‑43
Second most significant byte
of the subnet mask
255
FD‑44
Third byte of the subnet
mask
255
FD‑45
Least significant byte of the
subnet mask
0