Inovance Monarch NICE-L-C-4037F User Guide

- 11 -
Introduction
Name Model Function Remark
PG card
MCTC-PG-A2
It is used to adapt to the push-pull and open-
collector incremental encoders.
-
MCTC-PG-D
It is used to adapt to the UVW differential
encoder and applied to synchronous motor.
It requires 5 V power supply.
-
MCTC-PG-E It is used to adapt to the SIN/COS encoder. -
MCTC-PG-F1
It is used to adapt to the absolute encoder
(Heidenhain Endat).
Car top board (CTB) MCTC-CTB
The MCTC-CTB is the car control board of
the NICE3000new. It has 8 DIs, 1 AI and 8
relay outputs (10 for customized model). It
can communicate with the CCB and HCB
simultaneously.
-
Hall call board (HCB) MCTC-HCB
The HCB receives the passenger calls and
displays the oor where the elevator is
located and the running direction. It can also
be used as car display board.
-
Car call board (CCB) MCTC-CCB
The MCTC-CCB is another interface for
passengers to interact with the control
system. It mainly collects the car calls and
outputs the call indicator state.
Group control board
(GCB)
MCTC-GCB-A
The MCTC-GCB is used together with the
control system to implement group control of
a maximum of 8 elevators.
-
I/O extension card MCTC-KZ-G1
The MCTC-KZ-G1 is used when the
terminals on the MCB or HCB are
insufcient.
Residential monitoring
board
MCTC-MIB-A
This board communicates with the PC
installed with the monitoring software in the
monitoring room, helping users to query
the running status, current oor, and fault
information of the elevator.
-
External LED operation
panel
MDKE
It is the external LED display and operation
panel.
It provides the RJ45
interface for connecting
to the controller.
LED operator MDKE6
It is the external LED display and operation
panel.
It can be used for
copying parameter.
Extension cable MDCAB
It is a standard 8-core network cable and
can be connected to MDKE and MDKE6.
The cable length is
3 m in the standard
conguration.
Door pre-open module MCTC-SCB
The elevator car uctuates at in and out of
passengers and goods. This function allows
the elevator car to restore to the leveling
position at re-leveling speed with door open.
-
Monitoring board MCTC-MIB
This board communicates with the PC
installed with the NEMS software in the
monitoring room, helping users to query
the running status, current oor, and fault
information of the elevator.
-
Automatic rescue
device
MCTC-ARD-C
If an emergency power supply is used, the
system uses the emergency power supply to
implement self-rescue at low speed at power
failure.
-

Inovance Monarch NICE-L-C-4037F Specifications

General

Brand	Inovance
Model	Monarch NICE-L-C-4037F
Category	Controller
Language	English