Inovance Monarch NICE-L-C-4037F User Guide

- 59 -
3 System Functions
3
Related Parameters
Parameter No. Parameter Name Setting Range
Setting in Group
Control
Remarks
F6-07
Number of elevators
in parallel/group
mode
1–8 1–8
Set the value as the
actual number of
elevators in group
control.
F6-08
Elevator No.
1–8 1–8
Value “1”: elevator
1#
Value “2”: elevator
2#
By analog.
F6-09
Program control
selection 2
-
Bit1 = 0: Group
control by MCTC-
GCB-A
-
-
Bit4 = 1: Group
control in
compatibility with
NICE3000
Set Bit4 to 1 when
the NICE3000 is
involved in group
control.
You need not set the CTB address for group control.
3.2 Opposite Door Control
Background
This function is used to control two elevator doors.
Description
The NICE3000
new
supports four opposite door control modes: mode 1, mode 2, mode 3, and mode 4, as
described in the following table.
Table 3-2 Opposite door control modes
Type Door Control Mode Description
Mode 1 Simultaneous control
The front door and back door acts simultaneously upon arrival for hall calls and
car calls.
Mode 2
Hall call
independent, car call
simultaneous
Hall call: The corresponding door opens upon arrival for hall calls from this
door.
Car call: The front door and back door act simultaneously upon arrival for car
calls.
Mode 3
Hall call
independent, car call
manual control
Hall call: The corresponding door opens upon arrival for hall calls from this
door.
Car call: Upon arrival for car calls, the door to open is selected between the
front door and back door by using the door switchover switch. There are two
door open states for car call: only front door open and only back door open.
Mode 4
Hall call
independent, car call
independent
Hall call: The corresponding door opens upon arrival for hall calls from this
door.
Car call: The corresponding door opens upon arrival for car calls from this door.

Inovance Monarch NICE-L-C-4037F Specifications

General

Brand	Inovance
Model	Monarch NICE-L-C-4037F
Category	Controller
Language	English