How to fix black bars on Insignia NS-32E740A12?
If your Insignia LCD TV picture does not fill the screen and there are black bars around it, change the aspect ratio. An increasing amount of digital TV and movies are presented in wide screen (16:9).
How to prevent after images on Insignia NS-32E740A12?
To prevent after images on your Insignia LCD TV, avoid displaying a still image, such as a logo, game, or computer image, for an extended period. This can cause a permanent after-image to be burned into the screen, which is not covered by your warranty.
What to do if my Insignia NS-32E740A12 says no signal?
If your Insignia LCD TV displays a “No signal” error message, first, press the INPUT button to ensure that the correct input is selected for the device or service you are using. If you are using a cable or satellite box, use the remote that came with that box to change channels and ensure you have selected the correct input to view channels from the cable or satellite box.
How to eliminate audio noise from Insignia LCD TV?
If you are experiencing audio noise with your Insignia LCD TV, other devices may be interfering with your TV. Try turning off one device at a time to determine which device is causing interference and move it further from the TV.
How to fix poor color on Insignia NS-32E740A12 with good sound?
If your Insignia LCD TV has good sound but poor color, adjust the contrast, color, and brightness settings to improve the picture quality.
How to improve poor picture quality on Insignia NS-32E740A12 LCD TV?
If your Insignia LCD TV has a poor picture, ensure that the room is not too bright, as light reflecting off the screen can make the picture difficult to see. If an S-VHS camera or camcorder is connected while another device is turned on, the picture may be poor, so try turning off one or more devices.
How to resolve double images on Insignia LCD TV?
If your Insignia LCD TV displays double images, consider using a highly directional outdoor antenna, cable TV, or satellite TV to improve signal reception.
How to fix dotted lines on Insignia NS-32E740A12 LCD TV screen?
If your Insignia LCD TV displays dotted lines or stripes, ensure that the antenna or cable TV is connected correctly and securely. If you are using an antenna, the digital channel signal may be low, so consider adjusting the antenna or using a highly directional outdoor antenna or set-top antenna with a built-in amplifier. Also, make sure that the video cables are connected securely and try a new set of video cables, as the ones you are using may be bad. Other devices may be causing interference with your TV. Try turning off one device at a time to determine which device is causing interference and move it further from the TV.
Why does my Insignia LCD TV only show snow?
If your Insignia LCD TV only displays snow (noise) on the screen, try changing the channel to rule out station problems. Ensure that the antenna or cable TV is connected correctly and securely. If you are using an antenna, the digital channel signal may be low, so consider adjusting the antenna or using a highly directional outdoor antenna or set-top antenna with a built-in amplifier.
How to adjust color on Insignia LCD TV?
If your Insignia LCD TV shows no color, a dark picture, or incorrect colors, try changing the channel to rule out station issues. Adjust the color settings and ensure that the video cables and the antenna or cable TV are connected correctly and securely. If you are using an antenna, the digital channel signal may be low, so consider adjusting the antenna or using a highly directional outdoor antenna or set-top antenna with a built-in amplifier.
General| Response time | 9 ms |
|---|---|
| Display diagonal | 31 \ |
| Display brightness | 350 cd/m² |
| Display resolution | 1366 x 768 pixels |
| Native aspect ratio | 16:9 |
| Supported video modes | 1080p |
| Contrast ratio (dynamic) | 5000:1 |
| Contrast ratio (typical) | 1200:1 |
| Supported graphics resolutions | 1366 x 768 |
| 3D | No |
| Backlight | - |
| HDMI ports quantity | 3 |
| DVI-D ports quantity | 1 |
| DVI-I ports quantity | 2 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| S-Video inputs quantity | 0 |
| Product color | Black |
| Panel mounting interface | 200 x 100 mm |
| RMS rated power | - W |
| Power consumption (standby) | 1 W |
| Power consumption (typical) | 64 W |
| Remote control type | Standard |
Weight and Dimensions| Height (with stand) | 533.4000 mm |
|---|---|
| Weight (with stand) | 9888.3137 g |
| Depth (without stand) | 203.2000 mm |
| Width (without stand) | 736.6000 mm |
| Height (without stand) | 457.2000 mm |
| Weight (without stand) | 8164.6627 g |
Basic advice for safe TV operation and placement.
Guidelines for securely installing the TV on a wall.
Critical safety advice, including electric shock and handling the LCD panel.
Welcome, SRS TruSurround HD, and INlink features.
Step-by-step guide for physical setup.
Listing included items and identifying front controls.
Description of all available input/output jacks.
Detailed explanation of each button's purpose.
Guidance on selecting the best video/audio connection type.
Basic power connection steps.
Methods for connecting to TV sources.
How to connect broadcast signals without a box.
Instructions for connecting media players.
How to hook up entertainment devices.
Steps for PC connectivity via VGA or HDMI.
How to use the headphone jack.
Instructions for analog and digital audio outputs.
Guided process for initial configuration.
Turning on/off and selecting video sources.
How to interact with the on-screen display.
Procedures for changing channels and adjusting audio levels.
Customizing visual settings for optimal display.
How to display current program details.
Customizing sound profiles and features.
How to listen to audio without the picture.
Automatic search for available TV channels.
Securing TV access and device controls.
Restricting programs without ratings.
Configuring content restrictions by region.
Enabling and disabling subtitle features.
Selecting display styles for analog captions.
Personalizing digital subtitle appearance.
Configuring the TV's internal clock.
Scheduling automatic TV turn-off.
Changing the on-screen display language.
Customizing names for connected devices.
Managing automatic input detection and resetting preferences.
Controlling HDMI CEC devices and power settings.
Automating device power and controlling receiver volume.
Viewing connected HDMI CEC devices.
Accessing files from a USB drive.
Navigating and viewing image files.
Displaying images automatically.
Adjusting playback options for slideshows.
Instructions for cleaning the cabinet and screen.
Solutions for video, audio, and remote problems.
Detailed hardware and performance data.
Instructions and codes for using third-party remotes.
FCC, cable, and trademark compliance statements.
Coverage, claims, and exclusions.
To Next Page