Inspire CS4 - Installing Seat Pads

9
Step 2 Installing Seat Pads
Required Hardware:
5x
(#158) Button Head Allen Screw
5x
(#159) Spring Washer
5x
(#160) Flat Washer
6x
(#106) Allen Head Screw
Required Parts:
1x (#96) Seat Back Assembly 1x (#87) Seat Back Cover
Installing Seat Back
A.) Slide the bottom end of the (#96) Seat Back Assembly into the stem of the carriage.
B.) Attach pieces together using:
5x
(#158) Button Head Allen Screw
5x
(#159) Spring Washer
5x
(#160) Flat Washer
C.) Attach (#87) Plastic Seat Back Cover using:
6x (#106) Allen Head Screw